Family Site TECHLAND, INC.

  • TECHLAND, INC - TECHLAND, INC.

    TECHLAND, INC

  • TECHLAND, INC - TECHLAND, INC.

    TECHLAND, INC

  • TECHLAND, INC - TECHLAND, INC.

    TECHLAND, INC

  • Torque only sensor Torque angle sensor Assembly Line - TECHLAND, INC.

    The machine is designed for producing steer angle sensors

    Techland, Inc. designed a TOS/TAS assembly line.

    TOS/TAS (Torque only sensor Torque angle sensor) is steering sensor.

  • Valve Assembly Line - TECHLAND, INC.

    The valve for air condition of automobile would be automatically assembled in machine.

    Techland, Inc. designed a valve assembly line.

    The valve is for air condition of automobile.

  • LKAS Assembly Line - TECHLAND, INC.

    The camera automatic unmanned driving would be assembled in the machine

    Techland, Inc. designed a LKAS assembly line.

    The LKAS is a camera for automatic unmanned driving

  • Motor Assembly Line - TECHLAND, INC.

    The motor for automobile should be automatically assembled in the machine

    Techland, Inc. designed a motor assembly line.

    The motor is for automotive part..

  • Metal Quick Connector Assembly Line - TECHLAND, INC.

    The connector for an engine and fuel oil tank would be automatically assembled.

    Techland, Inc. designed a metal quick connector assembly line.

    The connector is for an engine and fuel oil tank..

  • Seat Height Assembly Line - TECHLAND, INC.

    The motor for seat height would be automatically assembled in the machine

    Techland, Inc. designed a motor assembly line.

    The motor is for the seat height in automotive

  • SAS Assembly Line - TECHLAND, INC.

    The SAS which is a kind of torque is automatically assembled

    Techland, Inc. designed SAS assembly line.

    The SAS is a kind of Torque

  • Brush Card Assembly Line - TECHLAND, INC.

    The brush card for motor is automatically assembled

    Techland, Inc. designed Brush Card assembly line.

    The brush card is for a motor

  • Electrode Punching & Cleaning Machine - TECHLAND, INC.

    The electrode is punched

    Cleaning the electrode using the vacuum absorber and brushes for removing foreign substances after the electrodes are cut.  It is divided into two categories :

    Cathode and Anode.

  • Z-stacking Machine - TECHLAND, INC.

    The electrode(cathode & anode) and separator are stacked, wrapped and tapped in the machine

    This equipment is designed to stack the anode and the cathode which are cut off, After then, to wind & tape the cell

  • Tab Welding Machine - TECHLAND, INC.

    Electrode terminal part is pre-welded and main welded in order.

    When put the cell in the machine, the electrode terminal part would be pre-welded.

    After Pre-welding, automatically 1st cut the terminal, and then terminal and lead assembly are ultrasonic welded

  • Al. Sheet forming Machine - TECHLAND, INC.

    According to cell size, the Al. sheet would be shaped in a cup.

  • 3-Side Sealing Machine - TECHLAND, INC.

    3-Side are sealed at the same time.

    According to cell size, the Al. sheet would be shaped in a cup.

  • El. Filling & Vacuum Sealing Machine - TECHLAND, INC.

    A certain amount of electrolyte is filled in the Pouch cell.

    After charging, the cell is degassed and finally 3sides are sealed

    1) Pouch cell would be charged a certain amount electrolyte. And wetting & hot sealing (Top part)
    2) After pre-charging, Degassing & Final Sealing.

     

  • Final Cutting Machine - TECHLAND, INC.

    The side and bottom of pouch cell would be automatically cut

  • EV Pouch Battery Product Line - TECHLAND, INC.

    From Notching(Punching) Machine to Inspection, a Whole pouch assembly line

    Battery Assembly line for Pouch Is consist of Notching Machine, Cleaning Machine, Zigzag Stacking Machien, Pre Welding Machine, Tab welding Machien, Al. Sheet Forming Machine, Pouch Sealing Machine,  El. Filling Machine, Wetting Machine, Loading &Unloading Machine, Degassing Machine, Wing Folding Machine, Hot Pressing Machine, Garading Machine, Inspection Machine.

    The main PLC is Mitsubishi. But also could be Siemens PlC(option).

     

  • EV Prismatic Battery Product Line - TECHLAND, INC.

    Battery Assembly line for Prismatic Is consist of Winding Machine, Jellyroll Pressing & Taping Machine, Terminal Welding Machine, Jellyroll Inserting Machine, Can-cap Welding Machine, Leak Test Machine, El. Filling Machine, Seal Pin Welding Machine.The main PLC is Mitsubishi. But also could be Siemens PlC(option).

  • Cylindrical Assembly Line _ Pilot - TECHLAND, INC.

    Battery Assembly line for Cylindrical Is consist of Tab Welding Machine, Winding Machine, (-)&(+) Tab Welding Machine, Beading Machine, El. Filling Machine, Crimping Machine.The main PLC is Mitsubishi. But also could be Siemens PlC(option).

  • Electrode Making Line - TECHLAND, INC.

    From Coater to Slitting, a Whole Electrode line.

    Battery Assembly line for Cylindrical Is consist of Tab Welding Machine, Winding Machine, (-)&(+) Tab Welding Machine, Beading Machine, El. Filling Machine, Crimping Machine.

    The main PLC is Mitsubishi. But also could be Siemens PlC(option).

     

  • About Us - TECHLAND, INC.

    Based on the fact that exploring the truth is our motif to achieve high technology, it is Techland‘s goal.

    To connect with and touch our customers.

    Company

    TECHLAND, INC.

    Establishment

    Feb. 4. 2009

    CEO

    Yoo, Seung-kil

    Employees

    28

    Address

    1264-15, Seohae-ro, Paltan-myeon, Hwaseong-si, Gyeonggi-do, Korea

    Business items

    Battery Assembly Equipment & Electrode Equipment

    Automotive Parts Assembly Equipment

    Contact Information


    Send Inquiry